 |
 |
Integration bay and feed of equipment X25 for the telecontrol EDF GDF
|
|
 Presentation
|
|
| 24U |
|
| Gate front glass green secure white |
|
| Panel rear to be mounted and quick set-up |
|
|
| Dimensions : |
| 1200 x 600 x 600 mm |
| Made up of : |
| 2 fixed plates |
| 1 connecting panel 16RJ45, fitted with 10 sockets RJ45 category 5+, mounted and wired |
| 1 connecting panel of 8 sockets 2 P+T with wired illuminated switch |
| 1 blanking disk 1U (tracking of RJ45) |
| 1 connecting panel 1U brush grommet |
1 converter 48 volts DC/230 volts AC sinusoidal, power 300VA, wired : Type RMS
DC/ACSR 348 |
All of our bays are fitted with a general earthing cable, to which, all parts of the bay are connected,
fitted with 48 volt earthing terminal assembly. |
|
| Possible options : |
| Rollers |
|
Pull-out shelf (set-up portable PC for configuration of modems and switches) |
| Different converter power : 700 or 1000 VA |
|
Connection wires for : |
 |
4 feed 48 volts CC by wire Hm 33534 |
|
4 connection France Télécom : wire 21 sets SYT |
|
4 switch connection PA |
|
4 modem connection RTC |
|
On-site installation, contact us. |
Installation includes fitting of the bay, connection of the ground circuit.
Laying of wire to auxiliary equipment 48 volts CC and telecom distribution frame.
Connection of the wire 21 sets on module CAD. |
| Diagram of use |
 |
)
