 |
|
|
|
|
 |
 |
RMS FOLLOWER 12/12 |
 |
 |
 |
 |
On vehicles, the RMS follower enables a correct voltage to be kept in all cases, and removes the drops in voltage when activating the starter. |
|
 Features |
Principle of operation
The follower is only validated if the input voltage exceeds 9.5 V.
Then the operation is next |
|
If the input voltage of the follower is higher than 12 Volts, the output voltage is equal to the input voltage. |
|
If the input voltage of the follower is lower than 12 Volts, the output voltage remains at a minimum 12 Volts. |
|
| Min. input voltage of validation of the follwer |
9,5 Volts |
| Variation range admitted to input |
4 V à 15 V max. (after validation) |
| Maximum output current |
5 amperes |
| Output voltage |
12 Volts minimum (after validation) |
| Loss in output voltage under 5A |
300 mV |
| Operating temperature |
-10°C to 50°C |
|
|
 |
|
|
)